AMG150-4GAT-P120
- Innovative thermally efficient housing ensures high levels of device reliability under full load
- -40°C to +75°C temperature maintains performance in extreme conditions
- Plug & Play – no need for any user configuration
- DIN rail or wall mountable – quick to install and remove for maintenance
- Power supply & PoE fault relay outputs
- Gigabit multirate RJ45 ports support all standard 10/100/1000Mb speeds
- Dual redundant power inputs
- Supports 15W and 30W PoE
- Transparent to all traffic types including Jumbo Frames, VLAN’s and Multicast etc.
- Designed in the USA & UK. Manufactured in the United Kingdom
- AMG Lifetime Support Warranty
Active
AMG’s industrial PoE injectors provide 30W or 60/90W of power injection on one, two, four, six or eight Gigabit Ethernet ports. Provided with dual power supply inputs and a fault relay as standard ensures maximum system reliability.
Designed in a compact DIN rail or wall mount housing, the AMG150 series industrial Power over Ethernet (PoE) injectors are ideally suited for providing power to remote edge network devices.
Available in both IEEE802.3at 30W or IEEE802.3bt 60/90W models they are suitable for powering the latest high powered PoE devices over a wide industrial operating temperature range.
The one/two port models feature the unique AMG dual active port PoE function which enables the units to operate as standard single channel injectors where power is supplied out from a single port or provide PoE power out of both ports simultaneously allowing 2 devices to be powered.
Fitted with dual redundant power inputs and power failure alarm relay ensures maximum operating reliability and the highest levels of performance.
A wide range of models are available to suit all design requirements.
PSUs need to be ordered separately.
Depth = 93 (mm) / 3.66 (in)
Height = 126 (mm) / 4.96 (in)