+44 (0) 1767 600 777

5000 Series

Analogue Fibre Icon

The AMG5000 series of analogue fibre transmission equipment is designed for point-to-point single channel video applications. With video transmission together with Ethernet, low speed data and audio signals options capability per transmitter device, 1 video channel, up to 2 data/audio and up to 4 i/o alarms plus 100Mbps of Ethernet can transmitted per unit. 100Mbps Ethernet and data/audio only units are also available The AMG5600 series is designed for multimode fibre, whilst the AMG5700 series is designed for singlemode fibre.

5000 Series

Designed for the job


Delivering resilient and managed transmission of both compressed and uncompressed video signals, the AMG5000 range is ideal for small to medium installations with a single camera/data device at each location point. Analogue video is transmitted in a real time uncompressed loss-less digital format whilst the option of Ethernet transmission ensures high definition cameras and other IP devices can share the same fibre infrastructure. As no compression of the video is used, there is no latency or compromise on quality making it idea for PTZ cameras and real-time data transmission.

5000 Series Designed for the job

Small, flexible and Resilient

Transmitters are available with and without video, data, up to 2 alarm i/o and for multi-fibre installations, up to 4 video channel and dual redundancy is an option. When configured in a dual redundant/self-healing ring option, the AMG5000 series ensures no loss of signal following a catastrophic fibre or node failure making it ideal for critical sites. The ultra compact Mini transmitter is idea for confined spaces such as camera poles and roadside cabinets.


Real-time loss-less digital transmission:
No loss of quality and zero lag, ideal for telemetry controlled PTZ CCTV cameras and transmission of time critical data such as serial bus data and alarms

Point-to-point topology:
1 video signal (one per fibre), 100Mbps of Ethernet, 2 data/audio and 4 i/o alarms signals transmitted simultaneously on one fibre

Up-the-Coax telemetry support
Supports CCTV systems with telemetry transmitted via the video coax cable. Available on some models

Compact design option
Mini version of transmitters available for confined spaces such as camera poles and cabinets

Dual Optical Redundancy option:
Both transmission paths are continually monitored and will self-heal automatically when a fibre break is detected

Built-in redundant switching:
No additional mechanical switching required to provide resilient ring operation

Simultaneous multiple video, Ethernet, data and audio transmission:
Only one transmission device required at each location

Wide link dynamic range:
No link margin adjustment required for installation, just plug in and switch on

Front panel LED status indicators:
Provide at a glance status monitoring

Plug in module for AMG2009 19” subracks:
Ability to mix multimode and singlemode products in the same rack

Data interface daughter board configurable:
Ability to address any interface protocol

Standalone and rackmount design
Rack mounts provide space saving, 19" rack, hot-swappable installation, reducing maintenance and wiring complexity. Standalone units are provided with clip-in mounting plates, idea for surface mounting in cabinets, walls, poles and confined spaces

LED status indicators
Provide sophisticated fault diagnostics at a glance

General security and surveillance, distribution centres, ITS and border control, campus sites, hospitality & healthcare, carparks and perimeter protection


5000 Series Schematics 1
Point-to-Point small site multi-analogue camera example
5000 Series Schematics 2
Point-to-Point analogue video, multi-IP camera over Ethernet and data example